This Cell Battery Holder Bracket is very useful and very flexible to use. This battery pack is of high quality with stylish design. This ...
In stock
3.7V 70mah Lithium ion Li-ion Battery, or more correctly lithium-ion polymer battery (abbreviated as LiPo, LIP, Li-poly, lithium-poly and...
In stock
This is General purpose 9V Non-Rechargeable Battery for all your project and application needs. As we experienced the use of this batter...
In stock
This is a 18650 battery with wire, JST connector and pre-installed Battery Management and protection board. You can directly use this 186...
In stock
3.7v Lithium-ion Battery more correctly lithium-ion battery is a rechargeable battery of lithium-ion technology using a polymer electroly...
In stock
18650 Lithium-Ion Cells are round high capacity cells have been mainly used in flashlight type applications but with its capability to be...
In stock
Rechargeable 2000mAh 7.4V Li-ion Battery Pack or Lithium-Ion Battery for Arduino, IoT, and robotic applications. This 18650 lithium-ion b...
In stock
3.7v 10000mAH Lithium-Ion Battery more correctly lithium-ion battery is a rechargeable battery of lithium-ion technology using a polymer ...
In stock
LiCB CR2032 or 2032 cell Lithium Coin batteries contain the substance manganese dioxide, which is chemically very stable. with high energ...
In stock
Features Of 1s To 8s Adjustable Lithium Battery Fuel Gauge LED Display 1s-8s Battery Capacity Indicator Board Module:Battery type electri...
In stock
Sold out
This is 18650 battery holder for 2 cells and works as spacer and holder. Radiating during high rate discharge. Every spacer has slots on...
Out of stock
Sold out
Accessory Type: Battery AccessoriesApplications: Rated Voltage 3.2V LiFepo4 batteries packCharging Voltage: 29.2VContinuous Discharging C...
Out of stock
This battery holder is made to hold four 18650-type batteries. The Cell holder has individual pins, on the bottom side, which are connect...
In stock
This is a 4S 18650 lithium battery charger protection board for 18650 cells and other Li-ion batteries. You can use this 4S BMS in the el...
In stock
7.4V Battery Pack For Arduino With Charger or Lithium-Ion Battery for Arduino, IoT, and robotic applications. This Arduino robot power su...
In stock
Sold out
This HX-4S-F100A based 100A BMS board also called ( battery management system ). HX-4S-F100A is a protection board for li-ion 18650 cells...
Out of stock
Energizer 9V Alkaline General Purpose Battery Energizer Max Alkaline 9 Volt Batteries provide long-lasting power source for such common w...
In stock
The battery holder case puts the batteries in series so that you have 4x the voltage of a 18650 battery. (About 15V at a cell voltage of ...
In stock
This aaa 1000 mAh battery is a type of battery, Rechargeable batteries are widely distinguished by a long service life and high efficienc...
In stock
Battery Charger Protection Board is a 3S 10A board. Lithium Batteries BMS with 10.8V rated voltage for polymer battery, 11.1V 18650, or 3...
In stock
Sold out
Out of stock
60A 48V 15S lifepo4 BMS PCM 32650 PCM battery protection board BMS E Bike
In stock
Delivering power when you need it, this12 Volt 12 AH this is a state of the art, heavy-dutylong backup and long life 12v 12a battery. The...
In stock
Sold out
Looking for the right battery for your project or device? MREECO Electronics, Hall Road Lahore, stocks lithium-ion and LiPo cells, 18650 batteries and holders, BMS protection boards, 9V and coin cells, 12V lead acid batteries, rechargeable AAA cells and battery chargers. Students, hobbyists, repair shops and engineers order from us for Arduino and robotics builds, drones, power banks, e-bikes and backup power. We deliver across Pakistan.
Which battery should I use for my Arduino or robot project?
A 7.4V Li-ion pack or a 3.7V 18650 cell with a BMS board is a common choice. Check your board's input voltage and the current your motors or modules draw, then pick a battery with enough mAh and a safe discharge rating.
Do I need a BMS board with 18650 or lithium cells?
Yes, when you use cells in a pack. A BMS protects against over-charge, over-discharge and short circuit, and balances cells in multi-cell packs such as 3S or 4S. Pick one rated above your maximum load current.
What is the difference between Li-ion and LiPo batteries?
Both are 3.7V per cell. Li-ion 18650 cells are cylindrical and rigid. LiPo cells are flat and light, which suits drones, RC cars and slim devices. Both need correct charging and a protection circuit.
Can I charge 18650 cells with a normal phone charger?
No. Use a proper lithium charger or a TP4056-type charging module with protection, which stops charging at 4.2V per cell.
How do I choose a 12V lead acid battery?
Match the capacity (Ah) to how long you need to run your load. A 12V 12Ah battery suits small UPS units, alarms, lighting and electronics projects. Use a matching lead acid charger.
Do you deliver outside Lahore?
Yes. We ship to cities all over Pakistan. You can also visit our shop on Hall Road, Lahore, or call 0342-9472107 to confirm stock before ordering.
Pick up where you left off
