Sold out
The 500mm Trapezoidal 4 Start Lead Screw 8mm Threaded Rod 2mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D ...
Out of stock
Best Online Shopping website for arduino cnc shield v3 a4988 driver board. Here you get arduino cnc shield v3 a4988 driver board in reaso...
In stock
Specification of PTFE Teflon Tube Material: PTFE (Poly Tetra Fluoro Ethylene)，Density: 2.15-2.20g/cm3 Heat resistance, up to 260℃ Outs...
In stock
3D Printer heatbed is for RepRap MK2B. Dual Power Supply is a Heated Bed designed for Reprap Prusa and Mendel 3D Printers. It can be used...
In stock
The LM8UU 8 MM Linear Motion Bearing gives you very precise, safe and reliable linear motion system. Such linear motion bearings are most...
In stock
T8 300mmx8mm Screw Threaded Rod is also named as a stud, it is a long rod and threaded on both ends. The fine threaded rod is made from h...
In stock
Features And Specifications Of M8 for 40 Series Slot T Nut Hammer Drop In Nut Fasten Connector 4040 Aluminum Extrusions:Material: Carbon ...
In stock
The GT2 pulley wheel with 20 teeth or grooves is one of the best choices for 3d printer construction and cnc machines. GT2 pulley tooth p...
In stock
Sold out
Precision workmanship, small product error.Simple installation and easy to use.Tight nut connection with precise threads.100pcs European ...
Out of stock
10mmx6.35mmFlexible Coupling Shaft can connect your driving shaft with the driven shaft. 10mmx6.35mm Flexible Coupling Shaft, it is very...
In stock
5x8mm Flexible Coupling Shaft can connect your driving shaft with the driven shaft. 5x8mm Flexible Coupling Shaft, it is very efficient i...
In stock
Sold out
The Pulley and The Timing Belt combo forms an integral part of the 3-D printer. These are used for the precision motion to print even the...
Out of stock
Specifications:Material: AluminiumFor: T8 Lead ScrewSize: refer to the description pictureWeight: about 50gSuitable: 3D PrinterPackage In...
In stock
The GT2 pulley wheel with 15 teeth or grooves is one of the best choices for 3d printer construction and cnc machines. GT2 pulley tooth p...
In stock
Features And Specifications Of T Slot Nut M5 Thread For 40 Series European Aluminium Profile Nickle Plated HammerHead Type T-Nut:Made of ...
In stock
Sold out
Features And Specifications Of VFD CNC Water cooled spindle Motor kit 220V 800W 1HP Spindle Motor & 1500W VFD & Cooling Water Pum...
Out of stock
Sold out
10x15mm Flexible Coupling can connect your driving shaft with the driven shaft. 10x15mm stepper Flexible Coupler, it is very efficient in...
Out of stock
This 4 Axis CNC USB Controller is designed to be used for notebook and tablets simple configuration and compatibility. The card can run w...
In stock
Sold out
5x6mm Flexible Coupling Shaft can connect your driving shaft with the driven shaft. 5x6mm Flexible Coupling Shaft, it is very efficient i...
Out of stock
Note: The color of the item may vary slightly due to photography and your own computer.Feature:Made of aluminum, it's durable and versati...
In stock
Sold out
The SS coating on these drill bits is harder than a TiCN coating and withstands high temperatures. It protects the bits from abrasion and...
Out of stock
5mmx6.35mm Flexible Coupling Shaft can connect your driving shaft with the driven shaft. 5mmx6.35mm Flexible Coupling Shaft, it is very e...
In stock
Engraving machine gear box 1.25M transmission synchronous wheel reducer
In stock
Build or upgrade a CNC router, engraver or 3D printer with parts from MREECO Electronics, Hall Road, Lahore. This collection includes the Mach3 USB 4-axis motion controller board, the Arduino CNC shield V3, T8 lead screws and brass nuts, GT2 belts and pulleys, LM8UU bearings, flexible couplings, T-nuts and corner fittings for 4040 aluminium profile, a NEMA 34 helical gearbox, an 800W water-cooled spindle motor kit with VFD, PCB engraving drill bits, and 3D printer parts such as heated beds and PTFE tubes.
A CNC machine also needs stepper motors, motor drivers and a suitable power supply. See the specifications on each product page before you order.
We deliver across Pakistan by courier and Pakistan Post, with cash on delivery available.
You need a frame (aluminium profiles and fittings), motion parts (lead screws, belts, bearings and couplings), stepper motors and drivers for each axis, a controller board, a power supply, and a spindle or tool for cutting or engraving.
A lead screw gives precise movement and strong force, and suits the Z axis and heavier machines. A GT2 belt is faster and suits long travel, but it gives less force.
The board connects your computer running Mach3 software to the stepper drivers, and sends the step and direction signals that move each axis.
The price depends on the part and its size. See the price on each product page, or call MREECO Electronics on 0342-9472107.
Pick up where you left off
